How Does a Well Water System Work? From Aquifer to Faucet
A well water system pulls groundwater from an underground aquifer through a drilled, cased well. A pump lifts that water into a pressure tank in your home. A pressure switch turns the pump on and off so the pressure at your faucets stays steady. Any treatment equipment cleans the water before it reaches your taps.
If you've just moved into a home with a private well, knowing how a well water system works makes every pressure drop, strange noise or "no water" morning much less stressful. At Robbins Water Service, our family has been drilling wells in New Jersey since 1910 and servicing pumps across South Jersey for generations. Here is the whole system, explained by the people who build it.
🎯 Key Takeaways
- Path of the water: aquifer → screen → casing → pump → pitless adapter → pressure tank → treatment → faucet.
- The pressure switch runs the pump, starting it at cut-in and stopping it at cut-out (often 30/50 or 40/60 PSI).
- The pressure tank protects the pump by preventing rapid on-off short cycling.
- No power, no new water. You only get what is stored in the tank unless you have a generator.
- Test for bacteria at least once a year; many South Jersey wells need treatment for acidity or iron.
In This Guide
- Where Does Well Water Come From?
- What Are the Main Parts of a Well Water System?
- How Does a Well Water System Work, Step by Step?
- How Does a Well Pump Work?
- What Types of Wells Feed a Home Water System?
- What Happens to Your Well Water System When the Power Goes Out?
- Is Well Water Safe, and How Is It Treated?
- Which Part Is Failing? Common Well System Problems
- Final Thoughts
- FAQs
Where Does Well Water Come From?
Well water is groundwater. Rain and snowmelt soak into the soil and collect in layers of sand, gravel and rock. Your well taps into that stored supply.
What Is an Aquifer?
An aquifer is an underground layer that holds water and lets it move. The top of the saturated zone is called the water table. It rises after wet seasons and drops during long dry spells, which is why well performance can change through the year.
The Aquifer Beneath South Jersey
Many homes in Burlington, Atlantic and Gloucester counties draw water from the Kirkwood-Cohansey aquifer. This large sand-and-gravel aquifer sits beneath the Pinelands. It holds an enormous supply, but its water is often naturally acidic and can carry iron. That's why water treatment is part of so many local well systems.
Why Well Depth Matters
Deeper wells reach water that is better protected from surface runoff and less affected by seasonal swings in the water table. The right depth depends on your property's geology. A local driller determines it during professional well drilling, not by guesswork.
What Are the Main Parts of a Well Water System?
Every private well relies on the same core parts. Each one has a single job, and when one part struggles, the whole system feels it. The parts fall into three zones: below ground, at the wellhead and inside your home.
Below Ground: Casing, Screen and Pitless Adapter
The well casing is the steel or PVC pipe that lines the borehole. It keeps soil and surface water out of your supply (see steel vs PVC well casing). At the bottom, a well screen lets water in while holding back coarse sand. Higher up, a pitless adapter lets the water line leave the casing sideways, underground and below the frost line, so it doesn't freeze in winter.
At the Wellhead: The Well Cap
The well cap sits on top of the casing above ground. A sealed, vented cap is your first defense against insects, debris and runoff. A cracked or loose cap is one of the easiest ways for bacteria to reach a well.
Inside Your Home: Tank, Switch and Treatment
The pressure tank in your basement or utility room stores water under pressure. The pressure switch mounted beside it decides when the pump runs. Any treatment equipment controls water quality. Choosing the right tank matters more than most homeowners expect. Our guide on how to choose the right well pressure tank explains why.
How Does a Well Water System Work, Step by Step?
Water starts in the aquifer around the well and flows through the screen into the casing. The pump lifts it up the drop pipe and sends it through the pitless adapter into the underground line to your home. Once inside, the water fills the pressure tank. The pressure switch then starts and stops the pump as your household uses water.
What Happens When You Turn On a Faucet
Opening a tap doesn't start the pump right away. Water first flows out of the pressure tank, pushed by compressed air above a rubber bladder. As the tank empties, the pressure gradually falls.
What Turns the Pump On and Off?
The pressure switch watches that falling pressure. When it reaches the "cut-in" setting, the switch starts the pump. When the tank refills to the "cut-out" setting, the switch shuts the pump off. Common settings are 30/50 or 40/60 psi. Our article on how much pressure should be in a well pressure tank covers how the tank's air charge is matched to these settings.
Why the Pressure Tank Protects Your Pump
Without a working tank, the pump would start every time someone filled a glass. This rapid on-off cycling, called short cycling, overheats the motor and wears it out early. A properly sized tank lets the pump run fewer, longer cycles.
How Does a Well Pump Work?
The pump does the heavy lifting. Which type you have depends mostly on how deep the water sits.
Submersible Pumps
Most modern drilled wells use a submersible pump. It is a sealed motor and pump unit placed deep inside the well that pushes water up to the house. Submersibles are efficient, quiet and suited to deeper wells.
Jet Pumps
Jet pumps sit above ground, usually in a basement or well house, and pull water up by suction. They are mainly used with shallow wells and older systems.
Constant-Pressure Pumps
A constant-pressure system uses a variable-speed drive. It speeds the pump up or slows it down to hold one steady pressure instead of swinging between cut-in and cut-out. Homeowners notice the difference most in the shower. If your pump is acting up, our well and pump repair team can diagnose it on site.
What Types of Wells Feed a Home Water System?
How a well was built affects both how much water it delivers and how safe that water stays.
Drilled Wells
Drilled wells are bored by a rotary rig, lined with casing and sealed at the surface. They reach deeper, more protected water and are the standard for new homes today. Here's what happens at each stage of the water well drilling process.
Dug and Driven Wells
Dug wells are wide and shallow. Driven wells are made by hammering a pipe into sandy soil. Both draw from shallower water that is more exposed to surface contamination and drought, which is why many owners eventually replace them with a drilled well.
What Happens to Your Well Water System When the Power Goes Out?
Your pump runs on electricity, so a power outage stops new water from coming out of the ground.
How Much Water You Still Have
You can use the water already stored in the pressure tank, but that's usually only a few gallons before the pressure fades. Fill a few jugs ahead of forecast storms.
Backup Power Options
A properly sized generator connected through a transfer switch can keep the pump running. Have an electrician confirm that the generator can handle your pump's starting load.
Checking Your System After Power Returns
Most systems restart on their own. If yours doesn't, read why your well may have suddenly stopped working before you call.
Is Well Water Safe, and How Is It Treated?
With a private well, you are responsible for water quality, not a utility. Clean water depends on regular testing and the right treatment. (For a side-by-side look, see well water vs city water.)
Testing Your Well Water
New Jersey's Private Well Testing Act requires testing when a home with a private well is sold. Landlords must also test regularly. Even without a sale, test for bacteria at least once a year and use a state-certified lab.
Common Well Water Problems in South Jersey
The issues we treat most often are low pH (acidic water), high iron, manganese, hardness, rotten-egg odors and bacteria. Acidic water deserves attention because it can corrode copper plumbing over time.
Where Treatment Fits in the System
Point-of-entry treatment equipment is installed after the pressure tank, so every faucet in the house gets treated water. Depending on your test results, that might be an acid neutralizer, an iron filter or a softener. Learn more about our South Jersey water treatment systems.
Which Part Is Failing? Common Well System Problems
Most well complaints trace back to one specific part. Knowing which one helps you describe the problem quickly when you call.
Low or Fluctuating Pressure
This usually points to a pressure tank that has lost its air charge, a worn pressure switch or a clogged sediment filter.
Pump Runs Constantly or Clicks On and Off
Rapid cycling often means the tank is waterlogged. A pump that never shuts off can point to a leak, a failing pump or a low water level.
No Water at All
Check the breaker first. In winter, a frozen line is a common cause. Our guides on frozen well lines and winterizing your well can help. If there's still no water, call a professional rather than repeatedly resetting the pump.
Final Thoughts
A well water system is simple once you see the path. Water travels from the aquifer, through the casing and pump, into the pressure tank, and out to your faucet, with treatment along the way. When each part is sized right and maintained, a private well delivers dependable water for decades.
If you're planning a new well or something in your system doesn't feel right, call Robbins Water Service at 609-268-2040. If you're comparing contractors, here's how to choose a well driller in New Jersey.
Frequently Asked Questions
How does a well water system build pressure?
The pump fills a bladder tank against compressed air. The pressure switch keeps the pressure between its cut-in and cut-out settings.
Does a well water system need electricity?
Yes. The pump needs power. During an outage you only have the water already stored in the pressure tank, unless you have a backup generator.
Can a well run out of water?
It can, during drought, heavy use or when the well recovers slowly. Deeper drilled wells are much less likely to run dry.
How often should I test my well water?
Test for bacteria at least once a year, and after flooding or any repair to the well. New Jersey also requires testing when a home is sold.
Do I need a filter for well water?
It depends on your test results. Many South Jersey wells benefit from treatment for acidity or iron.
Something in Your Well System Not Right?
Low pressure, a pump that won't stop, or no water at all: our team diagnoses pumps, tanks, switches and treatment on site, and drills new wells when it's time.
Phone: 609-268-2040 · Mon–Fri 7:30–4:30, emergency service on weekends
Location: 146 Stokes Road, Shamong, NJ 08088
About Robbins Water Service
Family-owned and operated since 1910 in Shamong, NJ, Robbins Water Service is a team of NJ Licensed Master Well Drillers, NGWA certified, a Grundfos Authorized Dealer and a Franklin Electric Certified Contractor. Every job is done by our own employees, never subcontractors. We handle well drilling, well pump and tank repair, geothermal and water treatment across Burlington, Atlantic, Gloucester, Ocean and Monmouth counties.


